MF plasterboard ceilings, suspended grid systems and bulkheads set to laser line across London and the home counties. Service zones coordinated with M&E from the start, so first fix lands clean and second fix never fights the ceiling grid.
Metal furring ceilings set dead level from laser datum, with hangers, primary and furring channels at the centres the span and load actually require.
Exposed and concealed grid ceilings in the specified tile, set out symmetrically from room centrelines so the perimeter cuts are even and intentional.
Bulkheads, rafts and stepped details formed straight and crisp, because the ceiling line is the first thing a clerk of works puts a laser on.
Access hatches, ventilation grilles and luminaire openings positioned from the M&E drawings, cut cleanly and trimmed properly rather than hacked in after.
Before we set a single hanger we walk the service zone with the M&E contractor, agree datum levels and fixing positions, and set out access hatches from their drawings. It is far cheaper to coordinate at that stage than to cut a finished ceiling open.
Yes, most commercial jobs carry both: MF in corridors and wet areas, grid in open office space. One team handles the lot, so the interfaces between systems are detailed once and built once.
Ceilings are set from a laser datum and checked against SE and manufacturer tolerances, typically within 3mm over a 3m straight edge. If the specification calls for tighter, we price for tighter and build to it.
MF & Suspended Ceilings or the full internal package. Drop the drawings in and we'll come back inside five working days with a fixed price and a programme fit.
Drawings welcome. Anything missing, we'll come back with a question, not a guess.
Your enquiry has been sent. We'll come back to you within one working day.